PubNub with AT&T's APIs Tutorial
What follows is a tutorial outlining how to get up and running with PubNub on a Rasberry Pi running Rasbian.
Originally published on the rexstjohn.com blog

- hackathons
- apis
Originally published at rexstjohn.com on October 23, 2013. Recovered from the Internet Archive.
What follows is a tutorial outlining how to get up and running with PubNub on a Rasberry Pi running Rasbian. I have created this tutorial to walk through the process of getting up and running with PubNub for the purpose of connected device / embedded device demonstrations at the upcoming Wearable Computing AT&T Hackathon.
Step 1: Have a Rasberry Pi configured and running Rasbian
This should be relatively straightforward, your OS does not honestly have to be Rasbian but that is what I am using to go through this process. More than likely any common Linux distribution will be fine.
In my case I ordered a basic Rasberry Pi development kit which comes complete with an HDMI cable, an SD card, a mini-usb power supply and a plastic shell to keep you from shorting out the motherboard.
You will need to have a PubNub account…logged in and activated as a developer (free!): www.pubnub.com
Also make sure you have (obviously) some type of internet connection whether it be a WiFi Nub or ethernet cable. Assuming your Pi is plugged in, turned on and connected to the internet…proceed from there.
Step 2: Clone into the PubNub C-Library GitHub Account
Create and navigate to a folder on your Desktop or other such desired location in the terminal. Much of this information can already be found on the GitHub page for the Rasberry Pi C client for PubNub here:https://github.com/pubnub/c.
On your standard command line run:
- git clone https://github.com/pubnub/c.git
- You will also need to run the following commands to install the libraries necessary to “make” or build the PubNub C libary
- sudo apt-get update (just in case you are out of date)
sudo apt-get install libevent-dev libjson0-dev libcurl4-openssl-dev libssl-dev
- Next, browse to your “C” folder which you just cloned from GitHub where the PubNub C libraries now should reside
- sudo make (to make the library)
- sudo make install (to install it)
Step 3: Test Your Pub / Sub Connection
Time to try a publish / subscribe communication between your Pi and PubNub.
- cd examples/sync-demo from the Git directory of your PubNub folder
- Open example-sync-demo.c with your favorite editor
Now change the following lines to match your PubNub pub / sub credentials. These credentials should be on your PubNub API dashboard:

Replace the demo publish and subscribe tags below with your actual credentials in the example-sync-demo.c file.
struct pubnub_sync *sync = pubnub_sync_init();
struct pubnub *p = pubnub_init(
/* publish_key */ “demo”,
/* subscribe_key */ “demo”,
/* pubnub_callbacks */ &pubnub_sync_callbacks,
/* pubnub_callbacks data */ sync);
json_object *msg;
- Next, customize your message which you are publishing to something you will recognize (line 27):
- json_object_object_add(msg, “str”, json_object_new_string(“\”Hello, AT&T Hackers!\” she said.”));
- Next, you will need to build a “.o” file by running “make” while in the examples directory. The result should be example-sync-demo.o.
- Run this file in the terminal with: ./example-sync-demo
- You should see the following:
pubnub subscribe ok, no news
pubnub subscribe [my_channel]: {“num”:42, “str”: “\”Hello, AT&T Hackers!\” she said.}