Skip to content
Rex St. John

Get in touch

Solving NPM ENOSPC Errors with Intel Edison and Intel XDK IoT Edition

If you are getting errors like the above with Intel Edison when using Intel XDK relating to “Error extracting update” or “Error: Command failed: x nodemodules/” you may need to reset your Edison by opening a terminal...

Originally published on the rexstjohn.com blog

Solving NPM ENOSPC Errors with Intel Edison and Intel XDK IoT Edition
Tags
  • intel-edison

Originally published at rexstjohn.com on November 4, 2014. Recovered from the Internet Archive.

Unknown

If you are getting errors like the above with Intel Edison when using Intel XDK relating to “Error extracting update” or “Error: Command failed: x node_modules/” you may need to reset your Edison by opening a terminal (using SSH if Edison is online on the local network or a USB if you are wired) and run “reboot ota.”

Once you have done that, you will need to log into Edison and run “configured_edison -wifi” to get the Edison online again.